[Adjustment]
1) LUX
It regulates day or night work.
A: When adjusted to the sun position, the sensor works all day;
B: When adjusted to the moon position, the sensor does not work during the day and automatically enters the working state at night.
2) time
It is to adjust the sensor delay time (20 ± 10sec ~ 8 ± 1min)
Immediate time refers to the time when the sensor leaves the sensing area after the sensor detects the person and the sensor immediately turns off.
3) SENS
It is to adjust the sensitivity of the sensor. Generally, no adjustment is required. If the induction is too strong and it is always on, you can adjust the sensitivity to the minimum position.
【The main technical parameters】
Detection range: 160 °
Working voltage: DC12V, AC85-265V (can be customized for various voltages and low voltage direct / AC)
Detection distance: 2-14m (24 ℃) (adjustable)
Delay time: 15 seconds to 9 minutes (adjustable)
Environmental illumination: 2 ~ 2000LUX (adjustable)
Working temperature: –10 ℃ ～ + 40 ℃
Operating humidity: less than 93% RH
Installation height: 1.8m ~ 3m
Material: ABS
Dimensions: 60 * 45 * 160mm (opening 16mm, 10mm)
Installation method: During installation, the adjustment knob faces downward.
PIR detector features
PIR (Passive Infrared) motion detectors are mainly used to detect moving people, animals or other objects. They can be used for automatic activation of lighting systems.
. The human body sensor uses pyroelectric infrared technology, built-in human body infrared sensor module, light effect sensor module, relay switch module. Using industrial-grade chip, large load capacity, strong anti-interference ability.
. When a person enters the sensing range, it can be turned on automatically. When the person leaves, it can be automatically turned off. This eliminates the manual waste of conventional lamps and unmanned switches. It prolongs the replacement of lamps, and saves energy, convenience and environmental protection.
. Can automatically identify day and night, and the external environment illumination can be freely selected to start the work automatically at night, closed during the day. Users can adjust by themselves;
. The detection distance is adjustable and can be adjusted according to the place of use;
. The lighting time is adjustable and can be adjusted by the user according to local conditions.